WARNING
There are dangerous voltages present on terminals of the PLC. Follow all warnings and instructions from the Allen-Bradley manual for connecting power to the PLC. If you are not familiar with hazards and the potential dangers of these voltages STOP RIGHT NOW. Consult a trained professional who is able to assist you.

First, backup up your original file and put it in a safe place.

Check the serial port settings of your computer in Control Panel. Make sure the baud rate (or bits per second) of your COM port is set as high as possible 57600 should work there.

Allen-Bradley provides a cable to connect the serial port of your computer to the 9-pin serial port on the SLC 500 processor. Connect the cable and turn power on to the PLC.

Turn the key operated switch on the processor to the center position PROG (program).

If you do not have RSLinx installed, you will have to do that now.

After you install RSLinx, you will have to configure it for your computer and your PLC.

To do that,

Choose
Start > Programs > Rockwell Software > RSLinx > RSLinx

In the Notification are of your Taskbar (the lower right of your Windows screen) that looks like this.

The one on the left is the RSLinx Communications Service. The other one is for the RSI Directory Service.

Click on the left one, the RSLinx Communications Service. The RSLinx screen will appear.

Choose

Communications > Configure Drivers

The driver screen appears.

Choose RS-232 DF1 devices from the “Available Driver Types” drop-down menu.

Click “Add New”.

Click “OK”.

You probably have your cable connected to COM1 of your computer. Click “Auto-Configure”.

In the box to the right of the “Auto-Configure” button, you should see a message that says “Auto Configuration Successful”. In addition, the “Device:” box should show “SLC-CH0/Micro/PanelView”.

Click “OK”. You should see a screen like this.

Click “Close”. You may close the RSLinx screen – RSLinx will still run, as indicated by the icon in the Notification area of your taskbar.

Open RSLogix.

Choose Comms > System Comm… from the menu. You will see a screen like this. You may have to maximize the screen and resize the panels to get the right view.

In the explorer panel on the left, click on the “+” next to “AB_DF1-1, DH-485”. You should see animation in the icon, as the tiny blue square moves around the little network symbol. The computer icon for address 00 indicates your computer. The icon for address 01 indicated the PLC. In our case, it is an SLC-5/03.

Select the SLC in the left window and click “OK”. The communications window will close.

In the RSLogix 500 main screen, choose File. Select your program from the Recent File List (it is probably 1).

Choose “Controller Properties” from the Project tree. Click on the “Controller Communications” tab.

Click on the “Driver” dropdown box and select “AB_DF-1-1”.

Click “Apply” then “OK”.

Choose Comms > Download

You should get a screen similar to this.

Choose “Yes”.

The program will begin downloading.

Since we are downloading a new configuration, this screen will appear.

Choose “Apply”. The program is now in the PLC.

Sometimes it is necessary to cycle power on your computer. Making the first connection to a PLC can be tricky. Prepare yourself by having the phone number for your Rockwell rep handy.

If things go well, you may be able to go online right away.

Choose Comms > Go Online

Choose “Browse” and find the folder where you file is located. Click “OK”.

The file name will show in the bottom box. Click on it to select it, then click “Upload Use File”.

You may need to change the Baud Rate of the PLC. Click “Channel Configuration” in the Project tree and click on the “Chan. 0 – System” tab. Choose “19200” from the Baud dropdown menu. Click “Apply” and “OK”.

Tip: In Allen-Bradley PLC vernacular, upload means get the program from the PLC and load it in RSLogix on your computer.

Download means send the program from RSLogix on your computer to the PLC.

You will now see a screen like this. Notice that the ladder icon is animated to indicate you are online.

How to Program a Programmable Logic Controller

Look around in any modern manufacturing facility and you will find PLCs, or Programmable Logic Controllers. You have seen all the names; Allen-Bradley®, Modicon®, Texas Instruments®, Siemens® and so on. Large companies and small companies use these types of computers running ladder logic programs to automate and control their manufacturing processes.

Understanding how these PLCs work is very important to anyone who works with industrial equipment. Fast and efficient PLC training is the best way to learn the ladder logic of PLCs. It will help you in your current job or help get you the job you want. More

PLC Programming with RSLogix 500

How to Program an Allen-Bradley SLC 500 with Rockwell Automation’s RSLogix 500

RSLogix 500 is used with the Allen-Bradley SLC 5/01, SLC 5/02, SLC 5/03, SLC 5/04, SLC 5/05 and MicroLogix PLCs

Rockwell Automation and its line of Allen-Bradley SLC controllers have been the dominant force in PLCs (programmable logic controllers) for many years. Their influence and market share continue to rise. Hundreds of thousands of processes and machine control applications are controlled by the Rockwell’s SLC™ 500 and their RSLogix™ PLC software.

This book teaches you, step by step, how to use the ladder logic of RSLogix 500™ with the Allen-Bradley® family of SLCs. More

PLC Programming with RSLogix 5000

How to Program Allen-Bradley ControlLogix and CompactLogix PLCs with Rockwell Automation’s RSLogix

RSLogix 5000 is used with the Allen-Bradley ControlLogix and CompactLogix PLCs

ControlLogix and CompactLogix controllers are the latest and most powerful addition to their line of PLCs (programmable logic controllers). Many processes and machines worldwide are controlled by the Rockwell’s Allen-Bradley PLCs and their RSLogix 5000 software.

This book teaches you, step by step, how to use RSLogix 5000™ with the Allen-Bradley® ControlLogix or CompactLogix families of PLCs. More

How to Program RSView32

How to Program an HMI and SCADA System with Rockwell Automation’s RSView32

In today’s industrial environment, controlling the logical operation of a machine or a process is only half the solution, though. A reliable Human Machine Interface, or HMI, is just as critical.

RSView32 provides an inexpensive but powerful solution. Not only can RSView32 work as HMI software, it can also function as a full fledged SCADA (Supervisory Control And Data Acquisition) system. More

How to Troubleshoot with a PLC

How to Diagnosis and Correct Problems with RSLogix 500 and RSLogix 5000

Troubleshooting is how engineers and technicians find and correct problems in a mechanical or electronic system.

It is a necessary skill for all those who are responsible for building or maintaining industrial systems and equipment. It is apart of their daily lives. Understanding ladder logic is an important part of troubleshooting automated systems.

“How To Troubleshoot With A PLC” teaches you how to troubleshoot a system that is controlled by a PLC. It shows you how to interpret ladder logic to quickly find the problem with a machine. More